Smeg Basic line GW0160 60cm glassware washer
Your Location: Main>Euiqpment>Glassware Washer>Smeg Basic Line>GW0160
GW0160 is a glassware washer designed to work with one to two independent and flexible washing levels. The washing chamber measures 530x510x620mm (168L gross). Possibility for washing and thermic disinfection (up to 85°C).
Specifications and Technical Features
GW0160 (art. 860384)
LABORATORY GLASSWARE WASHER
- washing up to 85 °C – antibacterical thermal disinfection
- programs: 7 default
- microprocessor electronic control
- active thermodynamic drying
- alkaline powder detergent dispenser
- peristaltic pump for acid liquid neutralizer
- washing chamber and internal door in AISI 304 stainless steel
- external panels made of AISI 304 stainless steel
- n. 2 independent washing levels through telescopic guides
- external dimensions LxDxH: 600 x 600 x 850 mm
- internal working dimensions LxDxH: 525 x 490 x 570 mm
- incorporated water softener with salt sensor
- cold water and demineralized water connections
- electronic door lock system for user safety
- electrical connection: 3/N/PE 400 V – 50 Hz – 7 kW max
- single phase version available: 1/N/PE 230 V – 50 Hz – 2,8 kW max (GW0160-1)
- 60 Hz version available
- without trolleys
OTHER POSSIBLE CONFIGURATIONS
GW0160A (art. 860692)
LABORATORY GLASSWARE WASHER
- standard equipment
- additional booster pump for non-pressure demineralized water
Machine optionals
- AS4060 – AQUA STOP WATER LEAK KIT
- B6040L – STAINLESS STEEL PLINTH FOR 60 CM MACHINES WITH LOCK
- IRCP – CEILING SPRAY ARM
- P14060 – PERISTALTIC PUMP FOR LIQUID DETERGENT
- PAD1 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
- PAD2 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
- PAD2-60 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
- PAD2R – PAD2 RELAY KIT
- PAD2X – ST. STEEL BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
- PAD2X-60 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER – 60 HZ
- T6040 – STAINLESS STEEL FRAME FOR 60 CM MACHINES
- TOP60I – BUILT-IN TOP 60 CM
GW0160S (art. 860386)
LABORATORY GLASSWARE WASHER
- washing up to 85 °C – antibacterical thermal disinfection
- programs: 7 default
- microprocessor electronic control
- active thermodynamic drying
- peristaltic pump for liquid detergent
- peristaltic pump for acid liquid neutralizer
- washing chamber and internal door in AISI 304 stainless steel
- external panels made of AISI 304 stainless steel
- n. 2 independent washing levels through telescopic guides
- external dimensions LxDxH: 600 x 600 x 850 mm
- internal working dimensions LxDxH: 525 x 490 x 570 mm
- incorporated water softener with salt sensor
- cold water and demineralized water connections
- electronic door lock system for user safety
- electrical connection: 3/N/PE 400 V – 50 Hz – 7 kW max
- single phase version available: 1/N/PE 230 V – 50 Hz – 2,8 kW max (GW0160S1)
- 60 Hz version available
- without trolleys
OTHER POSSIBLE CONFIGURATIONS
GW0160SA (art. 860693)
LABORATORY GLASSWARE WASHER
- standard equipment
- booster pump for non-pressure demineralized water
Machine optionals
- AS4060 – AQUA STOP WATER LEAK KIT
- B6040L – STAINLESS STEEL PLINTH FOR 60 CM MACHINES WITH LOCK
- IRCP – CEILING SPRAY ARM
- PAD1 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
- PAD2 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
- PAD2-60 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
- PAD2R – PAD2 RELAY KIT
- PAD2X – ST. STEEL BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
- PAD2X-60 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER – 60 HZ
- T6040 – STAINLESS STEEL FRAME FOR 60 CM MACHINES
- TOP60I – BUILT-IN TOP 60 CM
Technical Features
| GW0160 TECHNICAL FEATURES | All versions |
| Electronic control | microprocessor |
| Standard programs stored | 7 |
| Customisable programs | 0 |
| Display with segments and communication | yes, 4 digits |
| Clock and calendar | yes |
| Tank internal temperature | from room temperature to 85°C |
| Accurancy | 0,1°C |
| Temperature sensors in tank | n° 1 x PT 1000 CLASS B IEC 60751 |
| Detergent and neutralizing agent dosing system | max. 1 powder dispenser and 1 pump for neutralizing agent |
| Detergent level sensor | no |
| Safety lock | yes, with electromagnetic release and automatic opening |
| Safety devices | safety thermostats, door interlock |
| Alarm display | 30 |
| Troubleshooting menu | no |
| Programme editing | no |
| AUXILIARY FUNCTIONS | |
| Storage of data for 250 most recently run programs | no |
| RS232 serial port for PC connection | no |
| Cycle storage | no |
| Cycle file download | no |
| Download archivio cicli | no |
| Program editing | no |
| WATER SUPPLY (PRESSURE 1,5-5 BAR) | |
| Cold water inlet | yes, hardness max 42°f |
| Demineralized water inlet | yes, < 30 μS/cm |
| Demineralized water booster pump | optional |
| Water softener incorporated | yes |
| Recirculation pump | 400 l/min |
| WATER HEATING | |
| Electrical | 6,3 kW on three-phase version, 2,3 kW on single-phase version |
| STEAM CONDENSER | no |
| DIMENSIONS LxDxH mm | |
| Outside (with built-in top) | 600x600x850 (830) |
| Inside (gross) | 530x510x620 |
| Net weight (Kg) | 72 |
| STAINLESS STEEL | |
| Wash tank | AISI 304 |
| Exterior covering | AISI 304 |
| ELECTRICAL POWER SUPPLY | |
| Max. voltage/power | 1/N/PE 230V ~ 50Hz 2,8 kW 3/N/PE 400V – 50 Hz 7,0 kW |
| NOISE LEVEL | max 50 dB |
Possible Washing Configuration – GW0160 Series
TWO SPRAYING LEVELS
This configuration has two washing levels with spray arms for different types of glassware.
Photo:
CS1-1 upper basket: it is fitted with RC1/2 net in the right side for the support of various glass items. On the left side: test tube accessory.
CS2 lower basket: SB28 insert on the right and SB30 on the left for washing beakers, flasks, plates and various other materials.
ONE MIXED INJECTION LEVEL
This configuration has one mixed injection washing level suitable for washing narrow-necked glassware and pipettes.
Photo:
LPM2020: this system allows simultaneously washing narrownecked glassware (flasks, beakers, round-bottom flasks) and 20 pipettes.Specific carriers for laboratories which clean many different types of glassware at the same time.
ONE INJECTION LEVEL
This configuration has one injection washing level suitable for washing narrownecked glassware.
Photo:
LM40: universal injection carrier as it optimises washing of narrow-necked glassware of different sizes. It has a capacity of 40 items and can wash both large items and small flasks or bottles.
Accessories – GW0160 Series
LM40
WASHING SOLUTION FOR NARROW-NECKED GLASSWARE TILL 49 CM IN HEIGHT
CS2
UNIVERSAL WASHING SOLUTION TO PLACE BIG DIMENSIONS GOODS OR SPECIFIC SUPPORTSS
LPM2010
MIXED WASHING SOLUTION FOR TEST TUBES,PIPETTES AND NARROW-NECKED GLASSWARE -20 +10 POSITIONS
RC1
SOLUTIONS TO BLOCK GLASSWARE INSIDE THE BASKETS
LB16S
INJECTION WASHING SOLUTION FOR 16 BOTTLES
CP192
WASHING SOLUTION FOR TEST TUBES TILL 192MM IN HEIGHT
LM40S
WASHING SOLUTION FOR 40 NARROW-NECKED GLASSWARE TILL 225MM IN HEIGHT
CSK2
WASHING SOLUTION FOR VARIOUS GLASSWARE PRODUCTS
CS1-1
UPPER LEVEL BASKET
Basic upper basket with sprayer. Suitable for glassware treatment.
CS2
LOWER LEVEL BASKET
Basic lower basket. Suitable for glassware treatment.
.
SB9
9 POSITION INSERT
Made of stainless steel, it is suitable for washing beakers and cylinders of max. 100 ml and funnels.
Dimensions: W x D x H = 420 x 145 x 160 mm
An insert for 14 positions is also available (SB14).
Dimensions: W x D x H = 422 x 146 x 184 mm
SB15
15 POSITION INSERT
Made of stainless steel, it is suitable for washing beakers and flasks. For use in combination with standard CS1-1 and CS2 baskets of 16 items and is made of stainless steel.
Recommended for flasks with a capacity of up to 1000 ml.
Dimensions: W x D x H = 400 x 195 x 115 mm
SB28
28 POSITION INSERT
Made of stainless steel, it is suitable for washing beakers and flasks. For use in combination with standard CS1-1 and CS2 baskets and LM20 insert. It has a capacity for 16 items and is made of stainless steel.
Recommended for flasks with a capacity of up to 1000 ml.
Dimensions: W x D x H = 400 x 195 x 185 mm
SB30
30 POSITION INSERT
Made of stainless steel, it is suitable for washing beakers of any size. For use in combination with standard CS1-1 and CS2 baskets and LM20 insert. It has a capacity of 30 items and is made of stainless
steel. Recommended for flasks with a capacity of up to 500ml.
Dimensions: W x D x H = 400 x 195 x 150 mm
An insert for 25 positions is also available (SB25).
CSK1
1-LEVEL SMALL GLASSES AND OBJECTS INSERT
It is suitable for washing glasses and objects of small dimensions.level
Dimensions: L x D x H 450 x 450 x 55mm, mesh 5 x 5mm
Space needed: entire washer
CSK2
½ LEVEL SMALL GLASSES AND OBJECTS INSERT
It is suitable for washing glasses and objects of small dimensions.
Dimensions : L x D x H 450 x 225 x 55mm, mesh 5 x 5mm
Space needed: half of a washer level
SERIES “CP”
¼ LEVEL TEST TUBE INSERT
Compartment suitable for test tubes up to 160. Accessory composed by 3 compartments and a lid. Different sizes depending on the test tubes model.
Space needed: 1/4 of a washer level.
CP105: test tubes up to 75 mm in height
CP132: test tubes up to 105 mm in height
CP192: test tubes up to 165 mm in height
CP222: test tubes up to 200 mm in height
PB50
BOTTLE INSERT
Suitable for holding 56 50 ml wide-necked bottles (screw cap GL32 ISO4796 or ground cap DIN12038 or non-standard cap).
Max. bottle size: diam. 46 mm – h 87 mm.
PB100 (not in photo) suitable for holding 32 100 ml widenecked bottles (screw cap GL45 ISO4796 or ground cap DIN 12038 or non-standard cap).
Max. bottle size: diam. 56 mm – h 100 mm.
PB500
BOTTLE INSERT
Suitable for holding 21 500 ml wide-necked bottles (screw cap GL32 ISO4796 or ground cap DIN 12038 or non-standard cap).
Max. bottle size: diam. 86 mm – h 177 mm.
PB250 (not in photo) suitable for holding 25 250 ml widenecked bottles (screw cap GL45 ISO4796 or ground cap DIN 12038 or non-standard cap).
Max. bottle size: diam. 70 mm – h 138 mm.
PB1000
BOTTLE INSERT
Suitable for holding 16 1000 ml wide-necked bottles (screw cap GL45 ISO4796 or ground cap DIN 12038 or non-standard cap).
Max. bottle size: diam. 101 mm – h 225 mm.
PV105
SLIDES INSERT
Microscope slide insert made of stainless steel. Suitable for positioning 105 standard microscope slides.
Dimensions l x d x h = 220x143x60 mm.
SL6
PLATE INSERT
It is suitable for washing up to Olympus-type plate for optical recognition of the blood unit. Hinged lid included.
Dimensions l x d x h = 485x145x80 mm.
SL9
CHROMATOGRAPHIC PLATES INSERT
Made of stainless steel, it is suitable for washing chromatographic plates. Capacity of 9 items.
It takes up 1/2 the space of a standard basket.
SL18
CHROMATOGRAPHIC PLATES INSERT
Made of stainless steel, suitable for washing 20×20 standard chromatographic plates. Capacity of 18 items. The guides are shaped in such a way that the support points are outside the working surface.
SERIES “PD”
DIFFERENT DIMENSIONS PETRI DISH INSERT
PD70S – 40 items, 50-70 mm positioned on the upper level CS1-1.
PD100S – 38 items, 70-120 mm positioned on the upper level CS1-1.
PD70I 40 items, 50-70 mm positioned on the lower level CS2.
PD100I – 38 items, 70-120 mm positioned on the lower level CS2.
SERIES “PF”
DIFFERENT DIMENSIONS MESHES
PF1/2, ½ space of CS2 or CS1-1
PF1, whole CS1-1
PF2, whole CS2
SA3
DIFFERENT DIMENSIONS HOLDING NETS
RC1 net covering a whole carrier,
RC1/2 net covering ½ carrier,
RC1/4 net covering 1/4 carrier
SERIES “U”
SPIGOTS OF DIFFERENT DIMENSIONS
Injection spigots available in the following versions:
– spigot for 6% and 12% butyrometers
– Nylon spigot for pipettes
– Spigots for glassware with the following heights: 90, 110, 140, 160, 180, 220, 240, 260 mm.
Suitable as spare parts on carriers already in use or to equip customizable carriers.
LM20
UNIVERSAL FLASK WASHING CARRIER
Stainless steel carrier for washing narrow-necked glassware up to 490 mm in height. Fitted with 20 nozzles and half the carrier space is free for mixed glassware suitable for a 1⁄2 basket accessory.
Positioned on the lower level.
LM40
UNIVERSAL NARROWNECKED GLASSWARE WASHING CARRIER
Stainless-steel carrier for washing narrow-necked glassware up to 490 mm in height, flasks, round-bottom flasks and graduated cylinders of various sizes.
Positioned on the lower level.
LM40S
UNIVERSAL NARROW-NECKED GLASSWARE WASHING CARRIER
Stainless-steel carrier for washing narrow-necked glassware up to 225 mm in height. Carrier with 40 spigots with the same height.
Positioned on the upper level.
LM80
UNIVERSAL NARROW-NECKED GLASSWARE WASHING CARRIER
Stainless-steel carrier for washing narrow-necked glassware up to 225 mm in height. Carrier with 80 spigots with the same height.
Positioned on two levels.
LB4B
BOTTLE WASHING CARRIER
Stainless steel trolley for washing large glass items. Suitable for washing 2 x 10 L bottles or 4 x 5 L bottles. Fitted with 8 special spigots.
Positioned on the lower level.
LBT5
BOTTLE WASHING CARRIER
Stainless steel carrier for large glass items washing. Suitable for washing of 5 x 5-litre bottles (diam. 180 x h.500mm, max neck diameter 80 mm). Fitted with 5 special spigots.
Positioned on the lower level.
LB8
BOTTLE WASHING CARRIER
Stainless steel carrier for washing large glass items. Suitable for washing 8 bottles of maximum 50 cm in height. Fitted with 8 x U6260 spigots and 8 x special spigots.
Positioned on the lower level.
LB16
BOTTLE WASHING CARRIER
Stainless steel carrier for washing 16 narrow or wide-necked bottles of 250-1000 ml (max. diam. 101 mm, h 450mm) or graduated cylinders (diam. max. 101 mm – h 495 mm).
Positioned on the lower level.
LB16S
BOTTLE WASHING CARRIER
Stainless steel carrier for washing 16 narrow or wide-necked bottles of 250-1000 ml (max. diam. 101 mm, h 250mm).
Positioned on the upper level.
LB16I: same carrier for the lower level.
LB32
BOTTLE WASHING CARRIER
Stainless steel carrier for washing large glass items. Suitable for washing 32 narrow or wide-necked bottles of 250-1000 ml, max. diam. 101 mm, H.245 mm.
Positioned on 2 levels.
LB1-20
WASHING CARRIER FOR BOTTLE OR DRUM
Stainless steel carrier for washing universal large glass items and suitable for washing one large bottle and/or drum. Bottle maximum dimensions diameter 300 x h. 350 mm.
Positioned on lower level.
LPM2010
MIXED INJECTION CARRIER FOR FLASKS, PIPETTES AND TEST TUBES
Stainless steel carrier for washing flasks, pipettes and test tubes. Suitable for washing of 10 pipettes up to 55 cm + 20 narrow-necked glass items + ¼ free space to be filled with a CP series test tube basket.
Positioned on the lower level.
LPM2020
MIXED INJECTION CARRIER FOR FLASKS AND PIPETTES
Stainless steel carrier for mixed washing of flasks and pipettes. Suitable for washing 20 pipettes up to 550 mm in height and 20 narrow-necked glassware with a maximum height of 49 cm.
Positioned on the lower level.
LR4
REACTORS WASHING CARRIER
Stainless steel trolley for washing four 3/5-way reactors of maximum 3 litres or up to 12 narrow-necked glass items. Fitted with 20 U6260 nozzles.
Positioned on the lower level.
LT20
WASHING CARRIER FOR FISCHER BOTTLES
Stainless steel carrier for washing 12 Fischer bottles and graduated cylinders with a maximum height of 55 cm. 6 positions for injection washing of narrow-necked glassware. Fitted with 18 spigots.
Positioned on the lower level.
LPV40
PIPETTES WASHING CARRIER
Stainless steel carrier for washing volumetric pipettes up to 55 cm in length. 20 positions for pipettes of 55 cm in height and 20 positions for pipettes and/or flasks of 45-49 cm in height.
LPT100
PIPETTES WASHING CARRIER
Stainless steel carrier for washing 100 pipettes with a capacity of 1 to 20 ml and a height up to 450 mm. The pipette washing disc is fitted into the carrier to allow fast loading and unloading access.
KP100
TAPERED AND CYLINDRICAL TEST TUBE CARRIER
Stainless steel carrier with drying system connection for washing of tapered and cylindrical test tubes by internal injection. It has a maximum capacity of 100 test tubes.
Positioned on the upper washing level.
KP200 (not shown in the photo): same carrier on two washing levels with a maximum capacity of 200 test tubes.
LB40
BUTYROMETER WASHING CARRIER
Stainless steel carrier for butyrometer washing . Suitable for washing 40 butyrometers. Specify the type of butyrometer in the order.
Positioned on the upper level.
